Results 1 to 3 of 3
-
26-05-2011, 07:51 AM #1
Harbor Point error code F6 HELP!!!!
My Harbor Point wall unit just shutdown and wont turn on again. I dont know much about ac units but i cant find any help. The unit itslef was leaking water from the bottom of the unit. I had to put cups under it to catch the water drops coming down. Also it was displaying an F6 error code. I didnt know this meant anything. I just moved into this studio apartment 3 weeks ago and i cant get my landlord to do anything. Any help. And i have a hunch it might be the drainage hose being clogged (this woud explain water dripping back into apartment) how can i unclog hose? and what does F6 mean? and how screwed am i, somehow i think this is gonna be bad and being in FL during summer will suck.
-
26-05-2011, 07:32 PM #2
Re: Harbor Point error code F6 HELP!!!!
Hello
Maybe if the drainage is unclean and if there is a water pump the latter may have a float switch alarm level contact interconnected with the controls and it holds the AC. The pump may also be dead. So, cleaning the water pipes/changing the pump would resolve the problem.
Try to reset power also (switch off and after a minute switch on the mains).
-
26-05-2011, 08:11 PM #3
Re: Harbor Point error code F6 HELP!!!!
First try and clean the drain hose.
Haven't found an F6 fault code in the documentation from Harbor Point, sure it's not an E6?
Harbor Point website
http://harborpointac.com/support/info_10.html
This shows some fault codes on page 10
http://harborpointac.com/download/us...ion_Manual.pdf
Service Manual here
http://harborpointac.com/download/us...ice_Manual.pdfBrian - Newton Abbot, Devon, UK
Retired March 2015