Results 1 to 10 of 10
  1. #1
    woof's Avatar
    woof Guest

    I bought a new compressor



    Yes, I'm a newby..........
    I bought a new in the box Copeland CR41KQ-PFV-980WB. I didn't have enough sense to ask a few basic questions at the time of purchase.

    1. Is this unit already charged with oil?
    2. The suction and discharge ports are at the top in the normal locations. But, there is another 3/8 inch line near the bottom of the unit. What is this for?? Oil charging??
    3. I assume this low port will need to be sealed. I this assumption correct??

    Thanx for the help

    woof



  2. #2
    Join Date
    Jan 2007
    Location
    India
    Posts
    65
    Rep Power
    19

    Re: I bought a new compressor

    woof,
    1. yes, this compressor charged with Oil.
    2. The additional 3/8"tube is process tube, in smaller hermetic compressor this process tube is used for refrigerant charging.
    3. After charging, this process tube should be pinched

    sendhil

  3. #3
    woof's Avatar
    woof Guest

    Re: I bought a new compressor

    Sendhil, thanx. Being new at this and dumb is no fun. Now I'm not quite a dumb as I was before.

    Thanx

    woof

  4. #4
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,024
    Rep Power
    60

    Re: I bought a new compressor

    If you check with the compressor details you will see that the 3/8" line at the base is the discharge line, the 3/4" is the suction at the top and the 1/4" at the top is the process tube.

    If you block off the 3/8" line you will blow the compressor.

    http://www.johnstonesupply.com/corp/...t_Code=B93-391
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  5. #5
    Join Date
    Jul 2010
    Location
    NTH.QLD Australia
    Age
    62
    Posts
    1,730
    Rep Power
    32

    Re: I bought a new compressor

    EH?.. suction and discharge at the top in normal locations?? Would have thought the 3/8 line at the bottom was the discharge line and the two at the top would be suction and access port. Had to check it out.. bottom line is discharge.. Mike.
    To the optimist, the glass is half full. To the pessimist, the glass is half empty.

  6. #6
    Join Date
    Jul 2010
    Location
    NTH.QLD Australia
    Age
    62
    Posts
    1,730
    Rep Power
    32

    Re: I bought a new compressor

    Brian UK, beat me again. Here was i doing the search and when i posted, Brian slipped in before me. That's a few times we've overlapped.. Mike.
    To the optimist, the glass is half full. To the pessimist, the glass is half empty.

  7. #7
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,024
    Rep Power
    60

    Re: I bought a new compressor

    Sorry Mike, not trying to outsmart you, honest.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

  8. #8
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    70
    Posts
    4,702
    Rep Power
    47

    Re: I bought a new compressor

    Is it's any consulation Mike. I recon Brian is hooked up to IBM.
    Maybe us mortals will stand more of a chance when He moves South West?
    Unless, He's got a long cable?
    Grizzly

  9. #9
    Join Date
    Jul 2010
    Location
    NTH.QLD Australia
    Age
    62
    Posts
    1,730
    Rep Power
    32

    Re: I bought a new compressor

    Hi there Grizzly, reckon Brian has the ability to press any key and the answer pops out,.. yep, IBM.. In reality, i started the response, then wondered off in another window to have a look at the picture of this compressor. That's when one can easily get side-tracked, so i should stay focused... Mike.
    To the optimist, the glass is half full. To the pessimist, the glass is half empty.

  10. #10
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,024
    Rep Power
    60

    Re: I bought a new compressor

    I also wonder sometimes whether the search engines, Google etc., are configured differently across the globe; this can speed up searches and downloads. We know that some countries operate restricted search engines whereas we seem pretty liberal here in the UK.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •