Results 1 to 5 of 5
Thread: Manitowoc SM-50 not harvesting
-
25-01-2011, 07:22 PM #1
Manitowoc SM-50 not harvesting
Bought the machine used and test it out when I bought it about 2 months ago and it worked like a charm....made over 50 lbs of ice.
I re-ran it about a month ago it was only harvesting about 6 cubes and the rest were sticking.
I re-ran this past weekend now all ice is sticking to the cups and not harvesting.
Any suggestions?
I read on another post to try non-stick spray like Pam?
I am wondering if the unit is heating up the cups to release the ice to harvest?
Before I drop the bucks on a service call anything I should try?
Harold in Houston
-
26-01-2011, 01:41 AM #2
-
29-01-2011, 01:59 AM #3
Re: Manitowoc SM-50 not harvesting
Low on *****, there must be a leak!
-
01-02-2011, 01:07 AM #4
-
01-02-2011, 02:28 AM #5
Re: Manitowoc SM-50 not harvesting
For a start try cleaning the cups with non abrasive scrubber pad. They should be squeaky clean and smooth to touch. If system has cleaning cycle try some icemaker cleaning solution from Refrig wholesaler
Similar Threads
-
Manitowoc Ice machine taking too long to harvest..
By nyTroX in forum Trouble ShootingReplies: 26Last Post: 08-05-2011, 09:39 PM -
Manitowoc ice machine
By Andy AC in forum CommercialReplies: 4Last Post: 23-04-2010, 09:14 AM -
locate aftermarket compressor 4a Q600 Manitowoc ice machine
By iceman6108 in forum CommercialReplies: 0Last Post: 11-03-2010, 04:07 AM -
Manitowoc Q series Ice Machine
By JerryG in forum Trouble ShootingReplies: 8Last Post: 12-05-2009, 01:57 PM -
manitowoc ice machine harvest cycle
By flyboy3b in forum Trouble ShootingReplies: 9Last Post: 26-05-2008, 06:51 AM