Results 1 to 7 of 7
Thread: Pipe Branch reinforcement
-
07-03-2006, 01:39 PM #1
Pipe Branch reinforcement
I am looking for a spreadsheet or notes
that can be developed into a spreadsheet for
calculating branch pipe stub-in into main header pipe at 90 degree and lateral
-
08-03-2006, 03:27 AM #2
Re: Pipe Branch reinforcement
Try ASME B31.5 for refrigerant piping or B31.3 for process piping. The procedure is covered in both of these standards.
-
02-01-2011, 06:40 PM #3
Re: Pipe Branch reinforcement
please help me if we can use T joints istead of y branch in ref. piping vrv system
-
02-01-2011, 11:24 PM #4
-
03-01-2011, 06:12 AM #5
Re: Pipe Branch reinforcement
this is Daikin make
-
03-01-2011, 06:54 PM #6
Re: Pipe Branch reinforcement
Then use the Daikin Refnets otherwise your warranty may be at risk.
Install as per the design scheme.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
06-01-2011, 06:25 PM #7
Re: Pipe Branch reinforcement
thank you Brain
Similar Threads
-
Mechanical pipe joints
By davidchesson in forum FundamentalsReplies: 7Last Post: 18-06-2006, 12:57 PM -
pipe sizeing tool
By Latte in forum Tools and CalculatorsReplies: 5Last Post: 10-12-2003, 11:32 PM -
How many small strands needed to equal pipe pressure drop?
By DaBit in forum FundamentalsReplies: 17Last Post: 25-08-2003, 09:56 PM -
Pipe sizes
By benncool in forum Chit Chat & Service StoriesReplies: 10Last Post: 08-07-2003, 10:58 PM