Results 1 to 2 of 2
Thread: Tolerances and Torques
-
16-11-2010, 03:37 PM #1
Tolerances and Torques
Hey all one of the Guys I have working for me is rebuilding a Carslile 06EM 199 semi hermetic
does anybody have any spec for them as he is a little concerned about the end float especially
ta
-
16-11-2010, 04:14 PM #2
Re: Tolerances and Torques
Go to carlisle compressor website, I do not have the information handy but they have a service guide with torque specs and a lot of other literature there.