Results 1 to 2 of 2
-
30-08-2010, 11:34 AM #1
Display problem with Samsung RS60
Hi all
Just returned from 2 week holiday to find our Samsung RS60 (RS60JJSM) fridge freezer display showing 88 88 (the last 8 blinking in its bottom right portion). The Our neighbours tell us that there was a power cut in the area and I'm guessing that maybe a pcb has been upset by the power outage. The unit appears to be freezing/fridging ok at the moment.
I have called Samsung support, but they have just directed me to a local company as it is out of warranty.
Can anyone help me with :
What is the error showing on the display (88 88)
Is there a standard reset for this.
If it is the pcb is it easily accessible and can I buy replacement to fit myself.
Many thanks
-
30-08-2010, 03:45 PM #2
Re: Display problem with Samsung RS60
Traditionally, and I'm no longer an expert on samsung, the lower RHS segment on the figure 8 was open circuit defrost or sensor fault, not PCB.
You could take a gamble on it being the PCB, but it may be a waste of time and money if it's the defrost circuit faulty.
And to me and to everyone else familiar with samsung, the defrost circuit failing happens more frequently.Last edited by paul_h; 30-08-2010 at 03:49 PM.
Similar Threads
-
Samsung SR-S2028CVW ice maker problem
By carolehenderson in forum DomesticReplies: 1Last Post: 07-03-2010, 08:55 PM -
Samsung SR-S2028. Fault Display shows 3 on Power Up
By simon23e in forum DomesticReplies: 3Last Post: 07-12-2009, 07:24 PM