Results 1 to 4 of 4
Thread: o rings
-
28-08-2010, 05:40 AM #1
o rings
replacing the o ring in a carlyle screw compressor , cant get one in anytime soon . we've decided to make our own . our question is , what material do we use for R134a . the o ring is used to seal the motor cover to the compressor
-
28-08-2010, 10:14 AM #2
Re: o rings
There is a different substance that do job even better.
Its Teflon wire, I use it all the time to seal large drier covers, compressor discharge and suction valves.
I have found the manufacturer website for you, get a roll of the material, it is very useful for any sealing job.
http://www.ameraflex.com/joint.html
-
28-08-2010, 10:52 PM #3
Re: o rings
Google search says HNBR material which can be hard to get in a variety of sizes .
-
30-08-2010, 09:50 AM #4
Re: o rings
interesting web site , thanks for the input
Similar Threads
-
Mycom 8L
By lraja in forum NH3Replies: 18Last Post: 16-11-2010, 09:31 PM -
Lubricating rings with POE/PAG - Bad Idea?
By Z2TT in forum TransportReplies: 9Last Post: 24-11-2009, 05:18 PM -
Compressor valve test
By RackMechanic in forum Air ConditioningReplies: 11Last Post: 03-02-2008, 05:57 PM -
Making the best of the worst...
By knkreb in forum Trouble ShootingReplies: 14Last Post: 26-04-2006, 04:41 AM