Results 1 to 7 of 7
Thread: Refco Gauges BM2-3-DS-CLIM
-
27-08-2010, 08:29 PM #1
Refco Gauges BM2-3-DS-CLIM
Can anybody tell me if the Refco BM2-3-DS-CLIM gauges actually have scales on them for R22 R410A & R407C and can they be used for any other types of gas ?
I understand that they come with 1/4 SAE and 1/2 - 20 UNF, so all bases are covered.
Has anybody experience of using this Refco gauge and if so what are they like ?
Any advice on any other gauges on the market that cover R410A and other gases would be helpful.
Thank's
-
28-08-2010, 03:49 AM #2
Re: Refco Gauges BM2-3-DS-CLIM
We're REFCO Exclusive Distributor in Vietnam
-
28-08-2010, 08:17 AM #3
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Refco Gauges BM2-3-DS-CLIM
Any gas pressure could be measured with this gauges but you need P/T chart for other gases.
I have them and they are OK for everyday use in AC business.
They are not much precise (small diameter, low resolution) for accurate calculation of superheat and subcooling. That is much easier with good digital gauges (Testo, Digicool).Last edited by nike123; 28-08-2010 at 08:42 AM.
-
28-08-2010, 12:36 PM #4
Re: Refco Gauges BM2-3-DS-CLIM
Manifold is ok, but I dont think you would be that thrilled with the gauges.
I think you would be better off with the Refco or Yellow Jacket 1% type.
-
28-08-2010, 09:10 PM #5
Re: Refco Gauges BM2-3-DS-CLIM
Dear kiwireeferman, can you be a little bit more precise please ?
I am a little confused mt friend.
Model Numbers would be most helpfull.
-
29-08-2010, 07:14 AM #6
- Join Date
- Sep 2007
- Location
- Split Croatia
- Age
- 57
- Posts
- 6,151
- Blog Entries
- 6
- Rep Power
- 36
Re: Refco Gauges BM2-3-DS-CLIM
http://www.refco.ch/en/products/gauges.php
Check R5 and R7 series.Last edited by nike123; 29-08-2010 at 07:16 AM.
-
29-08-2010, 07:17 PM #7
Re: Refco Gauges BM2-3-DS-CLIM
Thanks Everyone !
Similar Threads
-
How many gauges have you got?
By monkey spanners in forum Chit Chat & Service StoriesReplies: 9Last Post: 04-07-2010, 10:07 AM -
refco digimon gauges
By 123-steve909 in forum Tools and CalculatorsReplies: 14Last Post: 09-05-2010, 11:50 AM -
What gauges can i use for R407c????
By luke.180 in forum RefrigerantsReplies: 15Last Post: 29-01-2010, 07:50 PM -
Gauges Repair
By Danny11 in forum Air ConditioningReplies: 1Last Post: 17-05-2009, 08:10 PM -
Pressure gauges
By keepitcool in forum NH3Replies: 7Last Post: 06-11-2008, 04:23 PM