Results 1 to 8 of 8
-
25-08-2010, 09:22 PM #1
Need Rotalock valves that braze to compressor
Hi all
Does anyone know where I can buy rotalock valves that braze onto compressor insead of the nut type.
I have a stub welded compressor but I have to put rotalock valves onit, I have seen some on the net of the type I need . I have pasted link below.
Thanks
http://www.alibaba.com/product-gs/20...LE_VALVES.html
-
25-08-2010, 09:24 PM #2
-
25-08-2010, 09:35 PM #3
Re: Need Rotalock valves that braze to compressor
As Chris say's Climate youre best bet, what size stub is it, assuming its for suction however i think the smallest size they do is 7/8. Let us know the size of the pipe out of the pot and will try and give you a part number/availabilty
Last edited by Latte; 25-08-2010 at 09:37 PM. Reason: poor explaniation
-
25-08-2010, 10:56 PM #4
Re: Need Rotalock valves that braze to compressor
I've got the threaded adaptors to take rotalock valves from climate centre before.
This was for a copeland recip comp where the rotalock version is now obselete.
Was 7/8 and 5/8 pipe work.
Pain in the ass to do, next one i had go i chucked a rotalock scroll on it, job done
Some climate part no. 676425, 676423, 676426, 690391, not sure what you get in the sets.
Jon
-
25-08-2010, 11:12 PM #5
Re: Need Rotalock valves that braze to compressor
Hi everyone
Thanks for your help
The compressor is a copeland ZB45 with 7/8 suction and 1/2" stubs
If possile I need the delivery 1/2 to 5/8
suction 7/8 to 7/8
Parts numbers would be great it would save alot of explaining
Many Thanks
Chris
-
25-08-2010, 11:24 PM #6
Re: Need Rotalock valves that braze to compressor
looks like the valves you need are NRS pt No 690463. this kit has A 7/8 Suction and 5/8 discharge, however cannot find at the moment anything adapter kits. may be worth phoning climate technical. If you say you need adapter kits for the conversion of brazed to rotalock connections they should know what it is as ive just quoted that from their catalogue (Page 203)
If i can find anymore will post asap
Regards
Latte
-
25-08-2010, 11:37 PM #7
Re: Need Rotalock valves that braze to compressor
I think the adaptor kit is 676423 this is for ZR48-ZR72 comps, ZR72 being 6hp like the ZB45 you have. You could get a 5/8 to 1/2 fitting reducer for the valves.
-
26-08-2010, 08:32 PM #8
Re: Need Rotalock valves that braze to compressor
Hi ALL
I got on to the climate center this morning and they were very helpfull.
The have ordered me the adaptor kit for the ZR48 to ZR72
Thanks to everyone for all the Help much appreciated
Regards
CHris
Similar Threads
-
Grasso - 9 cylinder Compressor - Ammonia
By rlmts in forum Industrial CompressorsReplies: 24Last Post: 04-10-2010, 07:39 PM -
Lighting's affect on compressor load
By TeamESI in forum Tools and CalculatorsReplies: 0Last Post: 14-05-2009, 06:26 PM -
seized inv compressor
By flash in forum Air ConditioningReplies: 2Last Post: 09-04-2008, 06:56 PM -
SL/SB-400 Pump Down Procedures
By absolute-zero in forum TransportReplies: 1Last Post: 29-01-2008, 09:27 PM -
Compressor pumping efficiency
By shogun7 in forum FundamentalsReplies: 0Last Post: 25-02-2004, 10:50 PM