Results 1 to 6 of 6
Thread: nice ice machine problem
-
19-08-2010, 06:22 PM #1
nice ice machine problem
got a prob with this machine it makes ice but when the paddle stops it does not stop freezing,if i clear ice and start again watching ice start to form stop paddle s by hand it defrosts and drops ice should there be a magnet on paddle assy,but why does it work if i stop it by hand?
-
19-08-2010, 11:16 PM #2
Re: nice ice machine problem
what make of machine is it.
-
20-08-2010, 06:17 PM #3
Re: nice ice machine problem
its badged [nice ice]
-
21-08-2010, 06:05 PM #4
-
21-08-2010, 07:26 PM #5
Re: nice ice machine problem
Have a look at the paddle motor shaft, check that the pin, some times a split pin,you might have damage to the plastic part of the paddle wheels, it might turn in water but when it hits the ice instead of swinging the motor to activate the switch it can spin on the shaft.
-
23-08-2010, 07:41 PM #6
Re: nice ice machine problem
this machine uses a sensor [transmitter] fixed close to the paddle wheel,and a magnet on the paddle assy
Similar Threads
-
Ice Block Machine: Hoping to start an Ice Factory. Please Help!!
By promise1 in forum CommercialReplies: 15Last Post: 02-01-2011, 01:26 AM -
Manitowoc Ice Machine
By crazycohiba in forum CommercialReplies: 3Last Post: 27-08-2009, 05:19 AM -
Problem with freeze system on carpigiani machine
By Ben Taylor in forum Trouble ShootingReplies: 6Last Post: 04-05-2009, 06:52 PM -
Oil change problem
By murray75 in forum Technical DiscussionsReplies: 2Last Post: 06-02-2009, 07:20 AM -
York Chiller Excessive Purges Problem
By imranmd in forum CommercialReplies: 5Last Post: 07-03-2008, 05:13 AM