Results 1 to 49 of 49
Thread: using nitogen when brazing
Threaded View
-
31-07-2010, 06:45 AM #30
Moderator
Site Moderator : and general nice guy
- Join Date
- Oct 2003
- Location
- Belgium
- Age
- 62
- Posts
- 5,630
- Rep Power
- 34
Re: using nitogen when brazing
Yes I did Tycho - this is in fact one of the courses I give for PPL where I explain how the body reacts with changing heights and pressures and the phenomenas associating with this - but the point is that we replied to a post of James10 where he said that you will be dead with one (!!!) inhalation of OFN and this isn't true.
Originally Posted by Tycho
You're speaking of a whole room filled with OFN and you stay in there for an hour. That's an apple/pear comparison you're making now.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
Similar Threads
-
Brazing vs. soldering
By DaBit in forum FundamentalsReplies: 28Last Post: 19-03-2011, 11:50 AM -
Brazing in compressors?
By troymedhurst in forum Air ConditioningReplies: 20Last Post: 23-08-2010, 08:35 PM -
Flux and no flux brazing
By SkyWalker in forum FundamentalsReplies: 7Last Post: 09-05-2010, 10:43 AM -
brazing rod standards
By brian1 in forum CommercialReplies: 5Last Post: 02-05-2009, 12:00 AM -
Brazing Procedure Qualification
By Delboy in forum FundamentalsReplies: 13Last Post: 18-12-2007, 07:04 AM
