Results 1 to 10 of 10
Thread: Replacing R22 with R422D
Threaded View
-
17-06-2010, 03:38 PM #1
Replacing R22 with R422D
We have a customer with several 35year old Dunham Bush chillers curently running on R22. The chiller have Dunham Bush semi hermetic compressors.
They have been advised by a competitor to convert these to R422D. Has anyone any experience of this downgrade/upgrade?
We are concerned about the quantity of R422D to use when compared to R22 and whether or not the performance is going to be reduced as we have read that there can be oil miscibility problems, any thoughts or advice would be much appreciated.
If the upgrade to R422D is not going to be satisfactory, we will be advising to use R22R.
My own thoughts are to leave a 35 year old machine alone, as it is well passed its prime.Mobile A/C at its best, see avatar.
Bedford. Now retired and trying to relax.
Similar Threads
-
R22 to R417a or R422d succes or failure?
By just chilling in forum New to REReplies: 0Last Post: 23-10-2009, 08:23 PM -
R422d
By chillled in forum Supermarket RefrigerationReplies: 7Last Post: 08-04-2009, 05:09 AM -
Replacing a pari of compressors ona Carrier 30HR 121
By Sanshinman in forum CommercialReplies: 3Last Post: 06-11-2008, 06:50 PM -
R422D as a R22 replacement
By Mark in forum Supermarket RefrigerationReplies: 5Last Post: 05-09-2008, 07:54 AM -
Do we have some expert in replacing compressors
By Zahid in forum Air ConditioningReplies: 2Last Post: 01-07-2008, 07:59 AM