Condensate pump for Daikin FUQ units

[sparkatan]

What is the best pump that will fit in the corner space of a Daikin FUQ, 4-way blow unit? I would think a remote sump type would suit but has anyone tried this with success?

[brunstar]

little giant make a remote sump type and also sauermann.

[sparkatan]

Yes but do they fit/work?

[Brian_UK]

They need mounting outside the unit but yes they work.

[sparkatan]

I need something that will fit inside

[brunstar]

sauermann have a sump float type, the float switch you can mount within the unit and the small pump must be mounted vertically so it stays primed, this is linked via a phone cable between the two.

A lot of them you can mount the pump in line with your pipework depending on the installation.

http://www.lgpc.com/Product/ItemDeta...ProductID=1617

http://www.pumphousepumps.com/LineFullInfo.aspx?Id=40

[Andy AC]

I wouldn't have thought that those tiny sumps would keep up with the pumped output of the daikin unit?
Could you use the onboard pump to pump to a decent sized sump pump mounted somewhere else? - not necessarily any where near your pipework, but somewhere accessible.

Andy