General ASG17USCQ/AOH17UNBW

[aircon50]

Hi all.
Not been on for a while - had laptop problems, and have moved home. Enough ramble.
We have installed the above unit (customers own property), but the remote has gone missing. Correct me if I'm wrong, but the Manual/Auto button should place the unit into forced cooling. The interior unit powers up, the fan runs on low speed, but there is no output to outside unit.
Does anybody have any info on this unit, or can advise, please.
Best regards to all from Tenerife
Graham

[Brian_UK]

From what I can find on the Fuji/General site the Manual/Auto has two options.

1, Press for 3 seconds to get manual/auto

2, Press for 10 seconds to get forced cooling.

Hope this helps a bit.

[aircon50]

Thanks Brian
Apologies for the delay in replying.......
Think I've got it sorted. It would appear that the return air sensor was faulty. Although the sensor is fixed to the PCB, I've managed a temporary (will end up permanent) repair with a similar sensor, and so far is ok. Client has still not found remote, and local dealer has quoted in the order of 160€!
Besr regards
Graham