Results 1 to 9 of 9
Thread: Cold Room Door Seals
-
26-01-2010, 11:11 AM #1
Cold Room Door Seals
Can anyone let me have details of a UK based supplier of cold room door seals, preferably one that is online and has a good selection.
Thanks
-
26-01-2010, 07:49 PM #2
Re: Cold Room Door Seals
HI,
It's the wonder of Google----
http://www.absolutecoldroom.co.uk/sh...aram=cid%3D%26Brian - Newton Abbot, Devon, UK
Retired March 2015
-
27-01-2010, 12:22 AM #3
Re: Cold Room Door Seals
fermod they are the best
-
27-01-2010, 07:05 AM #4
Re: Cold Room Door Seals
Thanks, I have already tried the Google route and do know about Absolutecoldroom, but they don't have the gasket I need. Its a 'P' gasket 50mm long with a 20mm dia tube. I wondered if there was a specialist cold room gasket supplier that has a more comprehensive range.
-
19-04-2010, 08:08 PM #5
Re: Cold Room Door Seals
hi jus try FERMOD
-
20-04-2010, 12:45 AM #6
Re: Cold Room Door Seals
Hi Steve
There is one that i used a few years ago that i've been rackin my brain trying to remember what they were called.
They actually manfactured the seals so you had to buy a decent amount & i think were based somewhere in the south west.
Will only get chance to look through some old paperwrk tomorow eve now, if i remember or find anything i'll post the info..
Otherwise i seem to remember HRP & D&W having some in their catalogs at one time.. (If i'm not supposed to quote these companies, moderators plse remove)..
-
20-04-2010, 11:22 AM #7
Re: Cold Room Door Seals
just googled this mob,didnt see your section but they do have a fair range and may be able to help you out.
http://www.sealitltd.co.uk/mmm to beer or not to beer...........lets drink breakfast
-
20-04-2010, 01:49 PM #8
Re: Cold Room Door Seals
It's just come to me in flash !!
http://www.collins-extrusions.co.uk/
But they're near brum not the south west..
Hope they can help, let us know how you get on..
-
20-04-2010, 01:59 PM #9
Re: Cold Room Door Seals
scott doors,manchester
Similar Threads
-
Blind Cold room specs help
By frostedflake in forum Trouble ShootingReplies: 5Last Post: 13-03-2009, 01:49 AM -
Cold room floor
By Andy AC in forum CommercialReplies: 8Last Post: 19-02-2009, 04:26 PM -
Cold room design and erection
By tokichaw in forum IndustrialReplies: 1Last Post: 19-02-2009, 12:58 PM -
cold room
By CHILLED4 in forum Trouble ShootingReplies: 5Last Post: 16-11-2007, 11:44 PM -
Installation of cold room
By Josip in forum Legal-Business-MarketingReplies: 12Last Post: 12-03-2006, 09:20 PM