Results 1 to 9 of 9
Thread: Koxka display cabinet/multideck
-
25-03-2010, 09:54 AM #1
Koxka display cabinet/multideck
Hi guys i have a customer with a Koxka display cabinet, Mod - M-26-CUK, S no -N.958.219 R404A. The cabinet has the condensor underneath it (built in to frame), the customer has asked me to give him a price on fitting a remote condensor outside the shop to supply the cabinet as he has no AC in the shop and in summer time the fridge can struggle with the heat. Now this is a first for me so can anybody tell me if this will be efficient or is this a bad idea and might cause problems, if so can anybody give me the size of a suitable condensor for this (the pipe run will be about 10 metres) Thanks in advance
-
27-03-2010, 09:28 AM #2
Re: Koxka display cabinet/multideck
firts thing we need to know does it hav a tev or cap ?
-
29-03-2010, 09:37 AM #3
Re: Koxka display cabinet/multideck
capillary i think, can check it today
-
29-03-2010, 12:10 PM #4
Re: Koxka display cabinet/multideck
why not fit complete condensing unit on roof and size piping to suit,unsure as you say condenser is built into unit frame,maybe remove components make your own base and fit an oil seperator if required.
mmm to beer or not to beer...........lets drink breakfast
-
02-04-2010, 10:26 AM #5
Re: Koxka display cabinet/multideck
Had a look at it yesterday, it has 2 condensor coils underneath it (1 compressor) with 2 capillarys going to evap coil, i would fit a new condensing unit outside and not bother with the old kit, i just need an idea of what size condensor unit to use and pipe sizes etc, also i will need to fit an exp valve. Seems like a bit of hassle to do but customer has twisted my arm so to speak.
-
02-04-2010, 06:10 PM #6
Re: Koxka display cabinet/multideck
Koxka should be able to give you the duty of the fridge,failing that you could match the compressors and uprate depending on length of pipe run.
alec
-
02-04-2010, 09:35 PM #7
Re: Koxka display cabinet/multideck
fit a tev , cap no good if you fitting the condensing unit out side . wat size comp is on it now ? just get the same or a little bit bigger condensing unit .the case will hav a sticker on it telling you the kw ? and gas ? . never had that problem you have on them units . have you had comp problems with it ? might just need a good vac and gas change ?
-
07-04-2010, 07:44 PM #8
Re: Koxka display cabinet/multideck
Thanks for the info guys, will contact koxka first then go from there or will match it with similar size. The system itself works fine but the guys shop turns into a furnace in summer, theres a lot of kit piled into 1 small shop.
-
07-04-2010, 09:17 PM #9
Similar Threads
-
Structual Concepts Display case and a phamtom fault
By jimmylcoleman in forum Technical DiscussionsReplies: 2Last Post: 08-02-2010, 01:42 AM -
Hotpoint HME400N Fridge Freezer message on display:
By back2space in forum DomesticReplies: 0Last Post: 30-01-2010, 08:14 PM -
Samsung RS21DCSV1 Flashing Display
By leon in forum DomesticReplies: 5Last Post: 07-07-2009, 10:10 PM -
Wiring diagram for carrier cabine display
By optomik in forum ElectricalReplies: 0Last Post: 14-05-2009, 04:35 AM -
a frozen book display case
By tempo in forum Technical DiscussionsReplies: 3Last Post: 15-08-2008, 07:20 PM