Results 1 to 5 of 5
  1. 25-02-2010, 10:10 PM #1
    solo io's Avatar
    solo io
    solo io is offline Registered User Hey, I am new to : RE
    Join Date
    Mar 2009
    Location
    JORDAN
    Age
    35
    Posts
    6
    Rep Power
    0

    pipe and duct selection (needed)



    hello, how r u all?

    i'm looking for the charts that make me able to select the pipe diameters, and the tables that allow me to choose the Height and Width for the duct, and finally the chart to choose the diameter (for circular duct).

    plz.


  2. 25-02-2010, 10:45 PM #2
    Brian_UK's Avatar
    Brian_UK
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,024
    Rep Power
    60

    Re: pipe and duct selection (needed)

    Have you tried using a web search engine for this task?
    Brian - Newton Abbot, Devon, UK
    Retired March 2015
  3. 26-02-2010, 09:15 AM #3
    solo io's Avatar
    solo io
    solo io is offline Registered User Hey, I am new to : RE
    Join Date
    Mar 2009
    Location
    JORDAN
    Age
    35
    Posts
    6
    Rep Power
    0

    Re: pipe and duct selection (needed)

    yes, but nothing found
  4. 26-02-2010, 09:59 AM #4
    eggs's Avatar
    eggs
    eggs is offline VIP Poster
    Join Date
    Aug 2004
    Location
    England
    Age
    51
    Posts
    744
    Rep Power
    25

    Re: pipe and duct selection (needed)

    I have found a very good resource. What did you search for? Take a look.
    Engineering toolbox will reveal all

    eggs
  5. 26-02-2010, 09:39 PM #5
    nike123's Avatar
    nike123
    nike123 is offline Moderator Site Moderator : and general nice guy
    Join Date
    Sep 2007
    Location
    Split Croatia
    Age
    57
    Posts
    6,151
    Blog Entries
    6
    Rep Power
    36

    Re: pipe and duct selection (needed)

    Try Autodesk Revit MEP or AutoCAD MEP. It makes all calculations for you while you drawing pipes and ducts by placing line from A to B.

    http://docs.autodesk.com/RVTMPJ/2010...RME/index.html

    http://www.youtube.com/watch?v=pix1G...eature=related
    Last edited by nike123; 26-02-2010 at 10:15 PM.
« Previous Thread | Next Thread »

Similar Threads

  1. Duct sizing questions???
    By santi_obejero in forum Fundamentals
    Replies: 4
    Last Post: 26-12-2009, 03:16 AM
  2. Pipe temp vs. fluid temp / Thermocouple install
    By pjauff in forum Fundamentals
    Replies: 4
    Last Post: 12-03-2008, 09:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules