Results 1 to 2 of 2
Thread: Daikin VRV II Addressing
-
21-02-2010, 09:41 PM #1
Daikin VRV II Addressing
I am looking for a technical manual for addressing the indoor units on a Daikin VRV II system.
I have a single outdoor unit (REYQ8PY1B) with seven indoor cassette units. Each has a BRC1D52 remote control attached.
I am attaching attaching a Modbus Interface adapter which I have done a few times before, but on all the other systems they had the old remote control. The button configuration is different and cannot get to save new address.
-
23-02-2010, 10:18 PM #2
Re: Daikin VRV II Addressing
Hi Damoburn
I know that to address the systems using BRC1D52 controllers you need to press and hold the test button. You should have a 00 displayed. If you have 01 instead then your system cant see a central control device.
I have used a Bacnet gateway, and an i-controller but not a Modbus. Is this a control device, or just an enable/fault interface?
Similar Threads
-
Daikin not working... many problems
By stankovicv in forum Air ConditioningReplies: 26Last Post: 11-12-2010, 09:01 AM -
Daikin, Why do we bother?
By gwilliamson in forum Air ConditioningReplies: 21Last Post: 02-02-2010, 09:38 AM -
Daikin vrv addressing
By weidit in forum Air ConditioningReplies: 18Last Post: 20-01-2010, 10:33 PM -
Daikin AC parts from UK
By skel00 in forum Air ConditioningReplies: 5Last Post: 05-04-2009, 01:24 PM -
Fixing Daikin A3 Error
By Stuffy in forum Air ConditioningReplies: 3Last Post: 27-03-2009, 06:02 AM