Results 1 to 9 of 9
Thread: YCAM 150 Chiller manual.
-
04-02-2010, 11:33 AM #1
YCAM 150 Chiller manual.
please could anybody please point me in the right direction to get hold of a York Ycam 150 manual. i am especially after the controller manual which is a MILLENNIUM RECIP CHILLER. the passwords would help as well please.
if you have anything on PDF my email is davymc1473@yahoo.com
Many thanks
-
04-02-2010, 12:55 PM #2
Re: YCAM 150 Chiller manual.
please could anybody please point me in the right direction to get hold of a York Ycam 150 manual. i am especially after the controller manual which is a MILLENNIUM RECIP CHILLER. the passwords would help as well please.my e-mail is xtriant@gmail.com
-
04-02-2010, 07:36 PM #3
Re: YCAM 150 Chiller manual.
Guys
It's not good to put your e-mail addresses in the open forum.
The YCAM level 1 password is 1234 and the level 2 password is 4321....unless of course someone has changed them
-
04-02-2010, 08:30 PM #4
Re: YCAM 150 Chiller manual.
Thanks Frank.Do you have the service manual as well?its an YCAM 360 with R22 HEAT PUMP.
-
04-02-2010, 08:55 PM #5
Re: YCAM 150 Chiller manual.
Sorry Harry, I don't.
-
04-02-2010, 10:18 PM #6
Re: YCAM 150 Chiller manual.
what problem are you having with the chiller davy?
alec
-
05-02-2010, 08:03 AM #7
Re: YCAM 150 Chiller manual.
the problem is. the unit never got setup correctly and i could do with a list of parrameter for the config settings. its not a major problem but we don't even have a wiring diagram.
thanks for the reply.
-
23-03-2010, 03:14 AM #8
Re: YCAM 150 Chiller manual.
got to scan the manual, its old, when done will pm u
-
26-07-2010, 03:41 PM #9
Re: YCAM 150 Chiller manual.
Please can you help me about ycam 240 contoller fault " external interlock" , I can not restart the unit ....regards ...Luis
Similar Threads
-
York Centrifugal chiller operator manual
By prasannabr in forum ElectricalReplies: 4Last Post: 22-01-2011, 04:07 PM -
Trane Chiller manual
By PaulZ in forum Industrial CompressorsReplies: 2Last Post: 19-02-2008, 09:14 AM