Results 1 to 1 of 1
-
24-01-2010, 07:25 PM #1
fujitsu general awh14lsaz. error 02-communication error
i have a problem with this heat pump. error 02 shows up on the display on the front of the unit. A company here in spain called eurofred have told me its a communiction error,but didnt seem to want to help me anymore. i have checked the indoor and outdoor control board fuses,which are both fine. the single phase power supply goes to the indoor unit.then from there,to the out door unit. i have 240vac between terminals 1 and 2 at the outdoor unit. Can anyone tell me what the voltages should be at terminal 3, when connected,and disconnected. So that i can try and determine if the unit is loosing the signal at the indoor unit or at the outdoor?
Similar Threads
-
Fujitsu Error code 016
By dee in forum Air ConditioningReplies: 3Last Post: 26-01-2010, 10:45 PM -
Fujitsu Error Code E0:17
By krisbendeich in forum Trouble ShootingReplies: 3Last Post: 04-11-2009, 12:49 AM -
Fujitsu ASTA09LCC error code
By exotiic in forum Air ConditioningReplies: 9Last Post: 19-08-2009, 03:56 PM -
Fujitsu Ducted error code E0:00
By Debonair Spain in forum Air ConditioningReplies: 9Last Post: 24-06-2009, 12:25 PM -
Fujitsu ducted error code
By gille in forum Air ConditioningReplies: 9Last Post: 29-11-2008, 08:02 PM