Results 1 to 6 of 6
Thread: Bremma ice maker no water
-
18-09-2009, 02:06 PM #1
Bremma ice maker no water
i have an brema CB425A ice maker and pump is running dry i have replaced inlet valve but still no water is entering ice machine compressor is running also, step controler seems to be working fine,if i manualy fill machine works fine any suggestions?
-
18-09-2009, 03:52 PM #2
Re: Bremma ice maker no water
Have you checked that inlet valve is opening, ie does it have power?
-
20-09-2009, 08:02 PM #3
Re: Bremma ice maker no water
Ball valve/washing machine valve not working,or blocked.disconnect hose from back of machine,are you getting water there when you turn the valve on?if no then it wants replacing.
-
20-09-2009, 08:20 PM #4
Re: Bremma ice maker no water
Start from the main water valve and check every component on the way.
-
20-09-2009, 10:17 PM #5
Re: Bremma ice maker no water
put timer into harvest and check if you have power to the inlet vale
-
21-09-2009, 12:37 AM #6
Re: Bremma ice maker no water
As per chemi-cool start at the water supply valve on the wall and prove the water supply, some have pre filters that block-up, and solenoid valves that coils fail on, you proved it works in manually filled with water.
magoo
Similar Threads
-
Fact or Fiction
By david.findlay in forum FundamentalsReplies: 40Last Post: 09-03-2009, 06:19 PM -
Modifying aricond. for heating, cooling and hot water
By kimusabi in forum Technical DiscussionsReplies: 3Last Post: 10-10-2008, 07:28 AM -
Derating factor for ice maker using salty water
By Gonzalo Arias in forum NH3Replies: 1Last Post: 18-05-2007, 03:57 PM -
open cycle R718 A/C that also provides high purity water?
By star882 in forum Technical SpeculationsReplies: 7Last Post: 27-07-2006, 04:18 AM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM