Results 1 to 3 of 3
Thread: Frick TDSH 233 short
-
02-09-2009, 09:09 PM #1
Frick TDSH 233 short
Hey did anybody here ever have the potentiometer shaft stop rotating when the slide valve moves? I manually forced the slide valve(with solenoids) and saw motor amps change, took off pot and spun shaft by hand! I installed unit brand new from Frick almost a year ago. Gonna open it up in the AM, I'll let you know what I find.
-
03-09-2009, 04:05 AM #2
Re: Frick TDSH 233 short
Maybe the guide pin fell out allowing the shaft to spin freely.
-
04-09-2009, 08:33 PM #3
Re: Frick TDSH 233 short
Brand new unit installed this past April. Guide pin worn and broken off. Helical groove worn to a knife edge. No explanation. New parts in, runs fine. Unit starts and stops twice a day, mostly loads up to 100% and stays there.
Similar Threads
-
Frick TDSH 233L
By J.D in forum Industrial CompressorsReplies: 10Last Post: 29-07-2009, 08:04 AM -
problem with frick screw volume
By samlee12 in forum Industrial CompressorsReplies: 9Last Post: 20-06-2009, 02:46 PM -
Frick TDSH 355 l or PDSH 355L
By Peter_1 in forum Industrial CompressorsReplies: 7Last Post: 13-03-2009, 05:26 PM -
FRICK TDSH 233 Slide Valve and guide damaged
By 404cab in forum Industrial CompressorsReplies: 9Last Post: 30-07-2008, 11:24 PM -
SCR short in soft starter.
By mrsparky in forum ElectricalReplies: 0Last Post: 14-12-2007, 12:19 PM