Results 1 to 2 of 2
-
16-08-2009, 11:47 AM #1
Reg.Screw Chiller of Hanbell compressor
Dear all,
I have a problem with one of my air cooled chiller of Blue Star Make and Compressor of Hanbell Make.Its trippiong at high amp durning the chage ovr time from Denerator to normal power from substaion.Its nearly reaching to 320 Amp Then its tripping where has my compressore Max Amp is Only 230 Amp.
Hoping for a wartm rply from all of you.
Thanks
With Regards
Krishna SreekanthLast edited by chillin out; 17-08-2009 at 03:46 PM. Reason: removing personal detail
-
17-08-2009, 05:52 PM #2
Re: Reg.Screw Chiller of Hanbell compressor
hi there what voltage are u working on ?
how does your change over work ?
silent or contactors?
how do u start your compressor softstart 'part winding'star delta?
Similar Threads
-
Hanbell Screw Compressor Not Loading
By Denjosh in forum CommercialReplies: 6Last Post: 12-05-2010, 05:59 PM -
compressor failure
By linbill in forum Trouble ShootingReplies: 9Last Post: 11-10-2007, 07:40 PM -
compressor change on chiller
By airconadam in forum Air ConditioningReplies: 26Last Post: 30-05-2007, 10:05 PM -
One Half of a Part Wound Compressor Motor is Burnt
By aygul in forum Trouble ShootingReplies: 2Last Post: 25-08-2003, 11:11 AM -
Compressor failure...... cause
By herefishy in forum Technical SpeculationsReplies: 8Last Post: 06-12-2002, 12:15 AM