Results 1 to 26 of 26
Thread: Hitachi Set Free
Threaded View
-
08-07-2009, 02:37 PM #25
Re: Hitachi Set Free
Well we have done nothing but we got back the current on the phases.....
Why is that? is it a sensor that is the problem?
Before we had current between ground to phas but no current between phases. I went up yesterday and checked it again and now we have current between phases, well now we would like to test this but the first compressor need warm up time for 24 hours.... we read in the service manual that you could start the compressor cold but it did not say how to do this. So my question is how do we do that? we can not wait 24 houres because we have guesst in all the rooms.
Similar Threads
-
fujitsu wall mount volt free relay
By mike live in forum Air ConditioningReplies: 3Last Post: 09-04-2009, 08:26 PM -
Hitachi split timer LED 10 flash
By paul_h in forum Air ConditioningReplies: 5Last Post: 12-02-2009, 12:32 PM -
hitachi set free
By gille in forum Air ConditioningReplies: 1Last Post: 20-06-2008, 07:53 PM -
Need help on HITACHI VRF RAS10FSG-38
By cool#9 in forum Air ConditioningReplies: 1Last Post: 21-05-2008, 01:16 AM -
oil free compressor
By Lc_shi in forum FundamentalsReplies: 6Last Post: 22-10-2006, 01:28 PM