Results 1 to 3 of 3
Thread: carrier optimer 1946
-
03-07-2009, 09:21 PM #1
carrier optimer 1946
hi any 1 changed a drip tray on a integral carrier opttimer 1946? if so can you give me any pointers please. It looks easy but just making sure.
hello its me
-
03-07-2009, 11:09 PM #2
Re: carrier optimer 1946
hi maverick
if i mind rightly these are the ones with the sponge wick above the tray i always used to put some armaflex tape into the base of the new tray to stop the discharge pipe from touching the tray as over time it would cause the tray to crack again,you can really only change these from the back of the case and are quite tricky.
-
04-07-2009, 09:42 PM #3
Re: carrier optimer 1946
that sounds like fun.
hello its me
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
Carrier Chillers
By Ed Burris in forum Technical DiscussionsReplies: 6Last Post: 27-03-2010, 02:00 AM -
Geoff in NY ~ Carrier Parts
By Futsal1st in forum Trouble ShootingReplies: 6Last Post: 30-12-2009, 04:07 AM -
Help identifying carrier HiWall dom. split
By paul_h in forum Air ConditioningReplies: 4Last Post: 12-12-2008, 09:12 AM -
Carrier Chiller Help
By superswill in forum Trouble ShootingReplies: 7Last Post: 18-01-2007, 10:06 PM