Results 1 to 1 of 1
-
11-03-2009, 10:34 PM #1
Refrigerant blends for an autocascade system.
Hi guys, although i'm not a phase change builder i'm an engineering student and phase change systems for PC cooling are something that interests me no end.
This is all currently from a purely hypothetical point of view though I would one day like to move into the building of phase change units.
I was wondering what blends of refrigerants you would recommend for holding 300w at around -80*C in an autocascading system and what sort of compressor sizing you think would be well suited to this application.
Thanks in advance,
Denbob99
Similar Threads
-
Superheat and Subcooling
By Chunk in forum FundamentalsReplies: 42Last Post: 15-01-2011, 01:24 AM -
Leak Testing?
By Thana in forum Trouble ShootingReplies: 36Last Post: 31-08-2010, 02:57 PM -
Enthalpy Increasing Buffer System
By Reflexive in forum Technical SpeculationsReplies: 3Last Post: 23-12-2008, 03:18 PM -
Refrigeration system simulation and optimization
By autt in forum System OptimizationReplies: 7Last Post: 05-12-2008, 02:59 PM -
automating a chilled brine refrigeration system using ammonia refrigerant
By luciom in forum IndustrialReplies: 29Last Post: 02-10-2008, 09:48 PM