Results 1 to 4 of 4
-
14-12-2008, 01:29 PM #1
Panasonice error code -H14 - Indoor air sensor
Where the hell do i start to find this sensor i have lloked around for some time now and i have given up. What and where do i find this wonder of panasonic engineering
cheersLast edited by Brian_UK; 14-12-2008 at 11:37 PM. Reason: Font size increased to a readable level.
-
14-12-2008, 01:58 PM #2
Re: Panasonice error code -H14 - Indoor air sensor
Hey? What exactly is your question, where to buy one, how to diagnose it or what?
Where panasonic put their air temp sensor is where everyone else puts theirs.
It's the room temp sensor, exactly what it says, and there's only one place it can go with split systems without any optional extra controllers, in front of the indoor coil.
If it's a wall split, you can see it when you remove the grille and filters, it's that little black wire sitting in front of the coil up on the upper right hand side. And of course it plugs into the control PCB like every other unit, which you need to remove the complete fascia to access.
If it's ducted, it's in again front of the coil on the indoor unit, and you usually have to remove the return air plenum.
And a lot of the paneling to cut all the cable ties on the coil elbows as well as the PCB box cover..Last edited by paul_h; 14-12-2008 at 02:04 PM.
-
15-12-2008, 06:46 AM #3
Re: Panasonice error code -H14 - Indoor air sensor
If it is a split the plug connector for the sensors is coloured red and plugs into the controller PC Board. Follow the black wire until you see the sensor.
-
16-12-2008, 04:14 AM #4
Re: Panasonice error code -H14 - Indoor air sensor
Please provide model number?
If it is a CS-RE series, it maybe located on the PCB itself...
Similar Threads
-
Carrier Transicold Container Problem
By Shamel in forum TransportReplies: 39Last Post: 23-01-2012, 11:23 PM -
Digimax pipe sensor
By 330i in forum Air ConditioningReplies: 2Last Post: 31-07-2008, 01:16 PM -
Fault with Tango cassette
By airefresco in forum Air ConditioningReplies: 8Last Post: 19-09-2007, 08:42 AM -
Relief Header Sensor
By brian_chapin in forum NH3Replies: 16Last Post: 29-06-2007, 03:12 PM -
Oil Concentration Sensor
By Erik Detroit in forum New TechnologiesReplies: 2Last Post: 01-11-2005, 03:33 AM