Results 1 to 6 of 6
Thread: Which chilling system?
-
14-10-2008, 09:05 PM #1
Which chilling system?
I am involved with building of new hatchery,
They will need about 100 TR water chiller for cooling the hatching cells and Ac.
I am thinking of manufacture the chiller myself.
There are a few cooling methods:
Falling film chiller
Shel & tube
Plate heat exchanger
Ice builder
what would you prefer and why?
-
14-10-2008, 10:40 PM #2
Re: Which chilling system?
Plate & frame (or brazed plates) to limit refrigerant charge.
An ice builder if you have On-Peak & Off-Peak electrical rates.If all else fails, ask for help.
-
17-10-2008, 02:30 PM #3
Re: Which chilling system?
prefer plate heat exchanger if water average temp is 33 to 36 fahrenheit.we have done this before on poultry proccessing.
regardsabet
-
17-10-2008, 07:42 PM #4
Re: Which chilling system?
B"H
Hello Chemi,
No enough information:
type of water (sea or fresh?)
tem-re range
if the cleaning of the surface is needed
-
17-10-2008, 07:50 PM #5
Re: Which chilling system?
B"H
I would agree with US Iceman
-
26-11-2008, 08:18 PM #6
Re: Which chilling system?
water chilling for chicken cutting section they used,the water temperature req is 5 deg , this one is closed system during night time the chiller got freezed, the running pressure is 4.5bar, what temp and pressure the chiller got freezed?
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
Leak Testing?
By Thana in forum Trouble ShootingReplies: 36Last Post: 31-08-2010, 02:57 PM -
System Burn Out Troubleshooting
By altaf22m in forum Technical DiscussionsReplies: 13Last Post: 07-05-2010, 09:24 AM -
Burn out System, Clean up procedure. & Troubleshooting.
By altaf22m in forum CommercialReplies: 19Last Post: 15-04-2008, 07:03 PM