Results 1 to 3 of 3
Thread: mitsi city multi
-
02-10-2008, 09:09 PM #1
mitsi city multi
Hi guys just a few questions about energy monitoring on city multi. at the moment i have 5 pury ep 250 all linked via tb7 with g50 and pac sc51. then linked in to 2x pac yg60,then.5 two cores 1 to each unit from the 2x pac yg 60 . Then i am not sure do i just get clamps for out door mains. or you guys tell me the way and where to get clamps and any thing else cheers
-
03-10-2008, 07:43 PM #2
Re: mitsi city multi
In the Uk Mitsubishi Electric controls department tend to mop up projects like this.
You might need TG2000 software with PC ethernet interface with the G50 and also current meters connected to PAC-YG60
Suggest get specialist advice from Mitsubishi Electric air conditioning controls department.
They can give you all the info & specifications. They can attend site to final commission with you.
-
05-10-2008, 09:08 PM #3
Similar Threads
-
Mitsi City Multi 7100 code
By lonemascot in forum Air ConditioningReplies: 4Last Post: 14-05-2008, 07:34 PM -
Commissioning City Multi
By dallan in forum Air ConditioningReplies: 5Last Post: 22-09-2007, 09:39 PM -
Need input on City Multi
By TDfromNY in forum Air ConditioningReplies: 4Last Post: 09-06-2006, 03:31 AM -
mitsi city multi r407c
By mr slim in forum Air ConditioningReplies: 6Last Post: 06-03-2006, 10:54 PM -
Mitsi City Multi Compressor Death
By aeb200 in forum Air ConditioningReplies: 4Last Post: 16-11-2005, 09:10 AM