Results 1 to 3 of 3
Thread: Definition for cooler selection
-
16-09-2008, 07:56 AM #1
Definition for cooler selection
Hallo,
please, I'd like to understand better a definition I have found in a Bohn technical sheet.
I find the definition of "room temperature" as air reference temperature.
Is it the air inlet temperature in the coil or is it something different ?
Thanks
-
16-09-2008, 02:12 PM #2
Re: Definition for cooler selection
You can assume the room temperature and the temperature of the air entering the coil to be the same (unless cold air short circuits from another coil).
If all else fails, ask for help.
-
17-09-2008, 09:41 PM #3
Re: Definition for cooler selection
Usually the room temperature and the air temperature coil are the same. This is not always the same as the air entering the coil could be from a different area or have an element of another air stream such as a fresh air supply.
Most manufacturers of room air con will use the room temperature as the referance as the end user will understand the refeance
Brit
Similar Threads
-
Grasso compressor selection chart
By Rajkumar in forum Industrial CompressorsReplies: 5Last Post: 01-11-2009, 10:59 PM -
TX Valve Selection: PHT or TE
By JERRYCOOL in forum IndustrialReplies: 6Last Post: 05-08-2008, 02:10 AM -
selection of NH3 recierculation system/vessels
By SimonBrown in forum NH3Replies: 3Last Post: 19-02-2007, 04:22 PM -
Evaporator Selection
By chooipeng in forum NH3Replies: 12Last Post: 26-09-2006, 08:11 AM -
selection of centrifugal fan
By watana in forum Air ConditioningReplies: 0Last Post: 14-09-2003, 04:02 AM