Results 1 to 5 of 5
Thread: Gate Driver Problem
-
02-07-2008, 02:43 PM #1
Gate Driver Problem
I have YORk Centrifugal Chiller (model no. YTJ3C3E25CNJ) with VSD Control (Model no.
TM 658T B12F-50D ). Its NOT starting and showing error :
"VSD - Phase A Gate Driver"
Inspected the wiring but not found any faulty.
please give some clue.
TIA
-
02-07-2008, 11:42 PM #2
Re: Gate Driver Problem
There appears to be a problem with the Variable Speed Drive.
Wiring may be OK but inverter components are not.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
03-07-2008, 07:14 PM #3
-
08-07-2008, 05:33 AM #4
Re: Gate Driver Problem
Thanks guys!
After checking whole wiring and component again and again....what I conclude there may be 2 fault:
1. Gate Driver Board of Phase A inverter.
2. VSD Logic Board.
Or may be there is some FUSE/ Short-Circuit problem!!
first one seems to be very high probability!
Next I am going to change that!
please suggest if any thing else I can do w/o replacing ne components.
TIA
-
30-07-2008, 01:07 PM #5
Similar Threads
-
A strange problem
By MuhengineeR in forum Air ConditioningReplies: 14Last Post: 27-10-2010, 05:21 PM -
Furance problem
By ALONEI in forum Trouble ShootingReplies: 10Last Post: 14-05-2008, 11:32 AM -
York Chiller Excessive Purges Problem
By imranmd in forum CommercialReplies: 5Last Post: 07-03-2008, 05:13 AM -
Oil carry over Problem in Refrigeration Unit
By imranmd in forum IndustrialReplies: 1Last Post: 27-08-2007, 03:09 PM -
Condensation Problem At Door to Freezers
By mmarch in forum Air ConditioningReplies: 5Last Post: 17-10-2005, 02:42 PM