Results 1 to 3 of 3
-
15-07-2008, 05:59 AM #1
Cop Of Brine Plant And Chilled Water Plant
Dear Sir,
I Want To Kwon That What Should Be The Value Of Cop In Brine Plant (it's Multistage Screw Compressors And Refrigerant Is Nh3) And Chileed Water Is Also Screw Compressor And Refrigerant Is Nh3.
-
16-07-2008, 05:30 AM #2
Re: Cop Of Brine Plant And Chilled Water Plant
Get yourself a wattmeter and flowmeter and measure them!
It depends on too many things!
-
16-07-2008, 06:43 AM #3
Re: Cop Of Brine Plant And Chilled Water Plant
What I might suggest is not to worry about the COP should be, but find out what yours is...and then find ways to improve it.
The COP (as designed) depends on what the designer used for parameters.
It's possible to design cheap systems that have poor COP's, while a design with more heat exchanger surface (more cost) could be much better, but not running efficiently.If all else fails, ask for help.
Similar Threads
-
Ice Bank Tank for Chilled Water
By Samarjit Sen in forum CommercialReplies: 26Last Post: 31-10-2009, 09:18 AM -
Chilled water pipe work blocked
By puddleboy3 in forum Air ConditioningReplies: 11Last Post: 24-10-2009, 08:22 PM -
water cooled
By tait71 in forum Trouble ShootingReplies: 27Last Post: 02-03-2007, 06:22 PM -
chilled water storage tank!
By dchatta in forum Technical DiscussionsReplies: 4Last Post: 24-05-2004, 04:23 PM