Results 1 to 8 of 8
Threaded View
-
28-05-2008, 06:10 AM #7
Re: Condenser water causing corrosion
Hi,
If different metals is connected in the system and the cooling media enters to different circuits, it can be if the pH value of the water is in acidity range that results electrolysis.
But, we still need the results of the water analysis from 750 valve.
However, since the system is in condensation, some cooling media evaporates causing it the water to partly concentrated. then goes back to treatment circuit. We don't know what type of treatment they're doing but analysing to be like this, the probability of not maintaing the pH value to atleast 4-7 (alkaline) were likely a result of corossion and oxidation.
Similar Threads
-
pure water from air
By Lc_shi in forum New TechnologiesReplies: 32Last Post: 26-02-2009, 12:25 PM -
condenser cooling water flow
By claude11 in forum System OptimizationReplies: 2Last Post: 07-09-2007, 06:07 AM -
Making a simple water cooled condenser
By The MG Pony in forum FundamentalsReplies: 19Last Post: 01-08-2007, 11:02 AM -
How to adjust head on a water cooled condenser
By kengineering in forum Technical SpeculationsReplies: 5Last Post: 30-05-2007, 10:37 PM -
Building a wine cabinet
By Rory in forum Technical DiscussionsReplies: 38Last Post: 13-07-2004, 08:28 PM