Results 1 to 2 of 2
-
06-05-2008, 10:01 PM #1
Hiross Hirange Close Control Unit
Can anybody help? Recently aquired one of these units, I have the 501 code to get into the controller but i need the other codes. A compressor has just been changed on the unit and i would like to reset the running hours counter, but i need the code to gain that level of access.
thanks in advance
-
06-05-2008, 10:07 PM #2
Re: Hiross Hirange Close Control Unit
501 Should let you reset the running hours..
IIRC, it's under the service menu but if nobody replied in an hour, I will go to the van and get the manual out.
Similar Threads
-
MICROPROCESSOR DIAGNOSTICS/Differnces beteween TK/CTC
By REEFER-TEK in forum TransportReplies: 12Last Post: 27-03-2011, 04:12 AM -
A/C Control - Automatic Changeover Unit
By Pravin in forum Air ConditioningReplies: 5Last Post: 27-02-2009, 06:04 PM -
SL/SB-400 Pump Down Procedures
By absolute-zero in forum TransportReplies: 1Last Post: 29-01-2008, 09:27 PM -
Thermo King OptiSet
By REEFER-TEK in forum TransportReplies: 4Last Post: 06-12-2007, 07:23 PM -
TK basic micro-p features and functions
By REEFER-TEK in forum TransportReplies: 0Last Post: 05-12-2007, 06:25 PM