Results 1 to 5 of 5
Thread: Hello Can Anyone Help
-
04-03-2008, 10:06 PM #1
Hello Can Anyone Help
Hi Can anyone help in the uk or europe or usa i had to attend a call out the other day the equipment is a old Qualitair system with a lcd controller and the screen has gone on the controller and im trying to find where i can purchase one its not a Qualitair remote its a Enerzone systems 300x1 Statnet i can't find them anywhere except maybe usa.
So if anyone could help me it would be much appreciated does anyone no where i can get one from.
Thank's Ian
-
05-03-2008, 12:59 AM #2
Re: Hello Can Anyone Help
Hi Ian and welcome to the forum.
Checking the web I can see that your choice of 'stat isn't spread around too far is it ?
As it is an old Qualitair could you perhaps substitute an Eliwell type controller, I have done this in the past when the on board pcb has failed.
This is assuming that you don't need communications between units.Brian - Newton Abbot, Devon, UK
Retired March 2015
-
15-03-2008, 11:21 PM #3
Re: Hello Can Anyone Help
Thanks Brian for your advice dont think a elliwell will work because the system is fiited in a growing room and the room requires night time settings and daytime settings.I have an idea i might get it wired upto the local trend bms system and try and control it like that could be interesting.
Ian
-
16-03-2008, 01:10 AM #4
Re: Hello Can Anyone Help
Hi Ian,
Have a look at a DIXELL XLR130 or 170 . These have a Real Time Clock option and an Energy save option (basically Night setback modification to setpoint).
www.dixell.com
You might need to register to download manual.
-
09-04-2008, 10:43 PM #5
Re: Hello Can Anyone Help
Thanks for your info i will have a look at them controllers see what i can do
Ian