Results 1 to 2 of 2
-
03-04-2008, 05:52 PM #1
Frick RWB II 177H 400 Hp problems
I have a 400 horse screw in my ammonia refrigerated plant that is giving me fits. We manufacture ice as well as store in two vaults.
The screw runs fine until it has been at 100% with a slide stop of 3.6 to 3.8 VI for five minutes or so then sounds as if somebody is hitting the brakes on it. The amps jump to high shutdown and off it goes.
I have calibrated it, changed the oil, replaced the slide stop and slide valve Yuken valves, and had the motor checked by my local motor rebuild shop. The motor seems to be in good shape and thermal scan shows no significant problems in the starter can.
Anybody ever have one do this???
-
03-04-2008, 06:15 PM #2
Re: Frick RWB II 177H 400 Hp problems
Hi Warrenbuddy,
how much o'clock running from revision?
Similar Threads
-
Frick RWB II 177H 400 Hp problems
By warrenbuddy in forum New to REReplies: 1Last Post: 03-04-2008, 09:01 PM -
Oversized Liquid Recievers?? Problems??
By nickjh in forum FundamentalsReplies: 12Last Post: 12-06-2007, 07:54 AM -
Stal Problems
By NH3LVR in forum Industrial CompressorsReplies: 2Last Post: 16-09-2006, 11:08 AM -
Suction pressure problems on TS units at low ambient temps
By nova in forum TransportReplies: 10Last Post: 18-03-2006, 07:35 PM -
Oil return problems
By Peter_1 in forum IndustrialReplies: 37Last Post: 23-08-2004, 11:30 PM