Results 1 to 15 of 15
Threaded View
-
19-02-2008, 10:37 AM #1
Condensor Positioned below Parralell System
I have a debate that i wonder if any one can solve, if there is a real solution?
System: 2 Bitzer 4j13.2 194800 btu/hr with a 321000btu/hr THR Condensor 12deg TD running at -12C/45C.
From the plant the pipes go up into the roof (2 m) and run in the roof for 20Meters then down past the level of the compressors for a further 2meters ( Condensor 2m below Plant).
The plant has been running fine since 2000 and now there are queries about the position of the condensor.
I have installed certain components and i would like to find out what are the correct components and are risers and pipe size changes or additional components nessesary?
I have a check valve on the outlet of the oil sep and on the outlet of the condensor.
Who knows the answer??
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
Leak Testing?
By Thana in forum Trouble ShootingReplies: 36Last Post: 31-08-2010, 02:57 PM -
System Burn Out Troubleshooting
By altaf22m in forum Technical DiscussionsReplies: 13Last Post: 07-05-2010, 09:24 AM -
Burn out System, Clean up procedure. & Troubleshooting.
By altaf22m in forum CommercialReplies: 19Last Post: 15-04-2008, 07:03 PM -
Refrigeration system proposal; comments please.
By DaBit in forum Technical SpeculationsReplies: 13Last Post: 01-01-2003, 03:42 PM