Results 1 to 23 of 23
Threaded View
-
30-08-2007, 05:17 PM #1
Fundamental question (air in the NH3-system)
This is me frist Thread!
Fundamental question (air in the system)
Where are collect the air in the a NH3-Refrigeration-System
-45°C Booster and -20°C Compressor, Tc = 32° to 40°C
Collect the air for itself in the condenser or in the receiver tank, and why?
We have to same NH3-Refigeration plant on the world, only small differences in the thermo-siphon installation.
In one plant, we find the air in the receiver tank, drain out be gas purge.
In the other plant, we find the air in the condenser, here we can not drain out the air and we have trouble with oil temperatures is much to height.
Thank you !
Similar Threads
-
Daikin fault codes
By Chris2005 in forum Air ConditioningReplies: 45Last Post: 21-03-2012, 10:09 PM -
System Burn Out Troubleshooting
By altaf22m in forum Technical DiscussionsReplies: 13Last Post: 07-05-2010, 09:24 AM -
Burn out System, Clean up procedure. & Troubleshooting.
By altaf22m in forum CommercialReplies: 19Last Post: 15-04-2008, 07:03 PM -
Refrigeration system proposal; comments please.
By DaBit in forum Technical SpeculationsReplies: 13Last Post: 01-01-2003, 03:42 PM -
Automotive A/C Vent Temp Range vs System
By Don Browney in forum Air ConditioningReplies: 1Last Post: 15-05-2002, 06:19 AM