Results 1 to 14 of 14
Threaded View
-
10-08-2007, 04:12 PM #1
Frick RTM120SEB8 vibration concern
Hi Guys
I've a strange vibration on one of my compressors, when it is running between 15% and 45-50% of capacity ,it vibrate like hell, I'm not very familiar with Frick compressors as I'd usualy worked with Stal compressors. I can definetly say that is not a problem related to liquid refrigerant coming back on the suction line as i switch the compressors with the spare unit and this ones is running fine... I'd contact York service and they siad that up to 11mm/s vibration value is fine , but I don't trust them very much as with our VSM89 chillers warranty problem ,they were more concern to cover them up instead to solve them.....
Anybody has any suggestion or comments?
I'm planning to open the compressor as an apple and replace the berarings and inspect the screw conditions...
Ciao
Evapcooil
Similar Threads
-
Frick Premature Seal Failures
By Steve Wright in forum Industrial CompressorsReplies: 32Last Post: 11-06-2010, 02:34 PM -
Luiquid line vibration and liquid hammer
By Infinity in forum Trouble ShootingReplies: 12Last Post: 09-02-2007, 10:22 PM -
old frick system monitor
By rasgrant in forum NH3Replies: 5Last Post: 17-01-2007, 06:15 PM -
Vibration in refrigerant piping
By US Iceman in forum Technical DiscussionsReplies: 5Last Post: 01-05-2006, 11:53 PM -
Liquid Line's Vibration
By JERRYCOOL in forum IndustrialReplies: 20Last Post: 21-03-2006, 01:49 AM