Results 1 to 4 of 4
Thread: PIR Control for a Daikin
Threaded View
-
09-05-2007, 08:18 AM #1
PIR Control for a Daikin
Gents... Our place is beconing very focused on energy usage. To keep them happy, I've recently been insatlling Daikin FTXS hi-walls with the built-in occupancy sensor. This prevents the units running on full power when the room is unoccupied... thus saving some energy.
A high-wall is unsuitable for the latest application so I'm looking at an under-ceiling 4-way blow cassette. (An FUQ125).
This unit ticks all the boxes except for infra-red control. Does anyone have any ideas on how to stop the unit being left on full blast when the room is un occupied/over the weekend etc. The people who use the room can't be relied on. The unit will be stand-alone. Can PIR control be incorporated... or is there another way?
Thanks in anticipation! DM
Similar Threads
-
Daikin vrv control wiring
By Jase in forum Air ConditioningReplies: 4Last Post: 23-03-2011, 04:01 AM -
Daikin not working... many problems
By stankovicv in forum Air ConditioningReplies: 26Last Post: 11-12-2010, 09:01 AM -
Airwell Florida Inverter Air Condition - in need of help
By AndY1 in forum Air ConditioningReplies: 21Last Post: 05-07-2008, 10:48 AM -
Control scenario
By Mike Hopkins in forum Technical DiscussionsReplies: 5Last Post: 14-09-2007, 11:25 AM -
New Capacity Control Solution
By embrown in forum New TechnologiesReplies: 19Last Post: 30-12-2003, 01:33 PM