Results 1 to 13 of 13
Thread: Expansion Valve Selection
Threaded View
-
19-03-2007, 01:01 PM #1
Expansion Valve Selection
Hi,
I need the clarification on Expansion valve selection.
I have the capacity of 87KW
pressure drop 10 bar
Refrigerant R22
Expansion valve Danfoss TEX12 orifice no 4
This application used a compressor unit of tandem type.Each has the capacity of 41KW.
Now my question is :
During the part load application the only one compressor will be running.
Is this lead any problem to the compressor?
Basically i need the effect of oversized expansion valve?
Clarify it.
Best regards,
ravi perumal