Here is a question I have been askign myself and I am not sure what the best answer is.

You have a system where the condenser section and the evaporator sections are located in different areas and have different fans and motors.

When you configure your evaporator layout is it better to place yoru supply air fan prior to the evaporator (so you push air thru the evaporator) or is better to place the fan after the evaporator (so you pull air thru the evaporator)?

I would think that there are benifits to each location but I wanted to see if there was a standard used in the industry or if you guys had soem suggestions on which setupt to use and why.