Results 1 to 6 of 6
Thread: LG problem
Threaded View
-
21-06-2006, 03:21 PM #1
LG problem
Fitted my first (and last) LG floor standing split in december and a week later replaced the compressor under warranty due to the suction bend leaking.
Worked fine, ran nearly 24/7 until today when it was not cooling or heating. Took the 200 screws out of the outdoor just to remove the cover, compressor was running but no heat coming from the discharge. Put gauges on every schreader, but each one was the same, reading the head pressure around 7 bar. (R22) Checked the resistance on the comp, all windings read the same. (3 phase)
Any help much appreciated, I'm sure from reading a lot of threads theres a few engineers with LG experience!
Similar Threads
-
York Screw Oil Problem
By tomt in forum Technical DiscussionsReplies: 10Last Post: 02-12-2009, 02:48 PM -
what's the problem
By botrous in forum Air ConditioningReplies: 35Last Post: 22-06-2008, 02:54 AM -
Strange problem
By Peter_1 in forum ElectricalReplies: 9Last Post: 10-04-2007, 05:19 PM -
Condensation Problem At Door to Freezers
By mmarch in forum Air ConditioningReplies: 5Last Post: 17-10-2005, 02:42 PM -
Problem with centrif - help requested
By Brian_UK in forum Industrial CompressorsReplies: 5Last Post: 03-08-2005, 10:31 PM