Results 1 to 3 of 3

Threaded View

  1. 15-06-2006, 03:44 PM #1
    flasah's Avatar
    flasah Guest

    What kind of valve is this?

    Can anyone identify this valve? It has three staggered threaded 1/4" ports, a knob that pulls in and out, and is plugged at the other end. The body is 3" long and 1 1/2" in diameter. There are five of these used for manual capacity contol on a Grasso compressor.




    Patrick
    Last edited by flasah; 15-06-2006 at 04:43 PM.
« Previous Thread | Next Thread »

Similar Threads

  1. Scotsman commercial H2O inlet valve
    By fullcourt in forum Trouble Shooting
    Replies: 9
    Last Post: 25-04-2006, 11:41 PM
  2. Need a correctly sized valve
    By Abe in forum Commercial
    Replies: 2
    Last Post: 26-10-2005, 08:42 PM
  3. pressure drop between expansion valve and distributor
    By aygul in forum Technical Speculations
    Replies: 10
    Last Post: 22-01-2004, 09:47 AM
  4. TEV with MOP: how to keep valve body temp above bulb temp?
    By DaBit in forum Fundamentals
    Replies: 5
    Last Post: 16-10-2002, 12:38 AM
  5. Valve "Hunting"
    By Abe in forum Trouble Shooting
    Replies: 20
    Last Post: 21-01-2002, 12:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules