Results 1 to 18 of 18
Thread: Carrier Transicold problem
Threaded View
-
25-05-2006, 09:01 PM #1
Carrier Transicold problem
Hi there. I'm having a big headache with one "Carrier Mistral 500 Plus Diesel" unit.
Here, in Bulgaria, it's hard to find good service for such units. They either rush to replace parts, without attempting to find what the problem is or mess them up completely.
The unit in question had a hard time with someone of the second variety. That someone has completely destroyed one of the IC's on the logic board (OEM #133500). I've managed to identify it as the relay driver and with the help of good professionals we were able to repair the damage as much as possible.
Now the unit works fine using the diesel engine, but won't start the 3-phase electrical motor when plugged in. The motor itself works fine when jump started.
I was hoping to get some kind of wiring diagram to help me identify the problem, before going on with purchasing a spare board (~ 400 quid) and find out that nothing changes.
Thanks in advance.
Similar Threads
-
carrier fault codes
By richelli in forum Trouble ShootingReplies: 5Last Post: 18-06-2010, 07:35 AM -
Strange problem
By Peter_1 in forum ElectricalReplies: 9Last Post: 10-04-2007, 05:19 PM -
Carrier chiller oil migration
By lowtech in forum IndustrialReplies: 5Last Post: 30-04-2006, 04:11 PM -
carrier remote
By superswill in forum Trouble ShootingReplies: 2Last Post: 26-04-2006, 09:17 PM -
carrier controlers
By coolflow in forum Technical DiscussionsReplies: 2Last Post: 12-01-2006, 08:26 AM