Results 1 to 5 of 5
Threaded View
-
22-05-2006, 06:06 PM #1
1995 Chevrolet PU Truck AC Problem
Hi.
For no apparent reason, my AC compressor clutch suddenly does not engage. All fuses check ok. I have NOT checked out the relay. With controls set and engine running, no power is coming to the clutch. I have jumped across the low pressure switch and still nothing. To assure that it is a control or relay problem, I would like to temporarily run a hot wire straight from the battery to 1 of the 2 wires that activate the compressor clutch but I'm not sure which 1.
Any help is appreciated. Also, how do I check out the relay ?
I'm new to the Forum. I'm also limited on AC repair but I do have a professional set of gages and re-charge my systems.
Thanks Bob
jowens1997@aol.com
Similar Threads
-
York Screw Oil Problem
By tomt in forum Technical DiscussionsReplies: 10Last Post: 02-12-2009, 02:48 PM -
what's the problem
By botrous in forum Air ConditioningReplies: 35Last Post: 22-06-2008, 02:54 AM -
Strange problem
By Peter_1 in forum ElectricalReplies: 9Last Post: 10-04-2007, 05:19 PM -
Condensation Problem At Door to Freezers
By mmarch in forum Air ConditioningReplies: 5Last Post: 17-10-2005, 02:42 PM -
Problem with centrif - help requested
By Brian_UK in forum Industrial CompressorsReplies: 5Last Post: 03-08-2005, 10:31 PM