Results 1 to 12 of 12
Thread: Cold Room Design
Threaded View
-
12-04-2006, 08:20 AM #1
Cold Room Design
Dear All,
We have recently designed a cold room system in order to maintain Temperature = 4 - 6°C and Relative Humidity = 50 ± 5%.
We are achieving the conditions during most part of the day however we have problems during following situations:
1. DEFROST CYCLE:
During the defrost cycle the Rh is shooting upto 70% Rh which is not acceptable.
Defrost cycle is set for 3 minutes every hour.
2. COMPRESSOR CUT OUT:
During compressor cut off which is set at 4°C again the Rh is shooting upto 70%.
The above increase in relative humidity is not acceptable to the client even though the increase is only for 5 to 8 minutes in a hour.
Please give us your valuable suggestions regarding how to short out the problem.
Regards
vijay_study@rediffmail.comVijay Kumar
HVAC Design Engineer
BMCPL
"The more you sweat in peace less you bleed in war"
Similar Threads
-
Cold Room Design - minus 25deg C
By vijay_study in forum FundamentalsReplies: 34Last Post: 11-11-2009, 07:12 AM -
Cheese Room Design 24V DC
By jbelding in forum FundamentalsReplies: 10Last Post: 02-04-2006, 03:23 PM -
Installation of cold room
By Josip in forum Legal-Business-MarketingReplies: 12Last Post: 12-03-2006, 09:20 PM -
Cold Storage Design
By abbasi in forum Technical DiscussionsReplies: 11Last Post: 06-01-2005, 07:17 PM -
Large cold room for fresh produce made of Glass
By allanbaker in forum New TechnologiesReplies: 3Last Post: 11-05-2004, 09:04 PM