Results 1 to 13 of 13
Thread: Aermec water chiller set point
Threaded View
-
28-03-2017, 09:05 PM #1
Aermec water chiller set point
Hi all,
A quick ask re: an Aermec water chiller.
I have an AL75 alarm showing on the Carel controller stating "Anti Freeze alarm"
Since up'ing the water temp set point this alarm is no more.
A general rule of thumb, what water set point would be adequate for a chiller serving a commercial/retail building? I've been advised that anything lower than 9 degrees is more for processing applications, please advise?
Thanks