Results 1 to 8 of 8

Threaded View

  1. 26-01-2015, 11:38 AM #1
    spike47's Avatar
    spike47
    spike47 is offline Registered User Hey, I am new to : RE
    Join Date
    Jan 2015
    Location
    England
    Age
    57
    Posts
    3
    Rep Power
    0

    Fitting a Ranco K59 Thermostat

    Hi Guys

    I am replacing a Thermostat on my Old Electrolux F/F , the Capillary tube goes from the Thermostat then inside a plastic sleeve about 40cm long along the top of the F/F ( Attached pic ) inside the sleeve there is a cable that is a loop , it comes from junction box ( compressor ) then loops around the inside of the sleeve then back down again , the Question is what is the cable looping for ! .


    cheers

    spike
    Attached Images Attached Images
    Last edited by spike47; 26-01-2015 at 11:56 AM.
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules