Results 1 to 2 of 2
Thread: HP Cut OUt device
Threaded View
-
16-09-2005, 11:05 PM #1
HP Cut OUt device
What are the European regulations for installing a HP cut-out on a small hermetic compressor (1 HP) with max 2,3 kg refrigerant in the system?
Is it obligated to install one and what does the regulation say about the manual or automatic reset?It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
Similar Threads
-
Is a capillary tube considered to be a modulating mtering device, as a TXV is.
By TopMechanic in forum FundamentalsReplies: 10Last Post: 20-07-2006, 10:00 PM -
Switching device
By Pravin in forum ElectricalReplies: 9Last Post: 08-06-2006, 05:07 PM -
Energy Managment XDX Device
By Steve Wright in forum Supermarket RefrigerationReplies: 1Last Post: 08-09-2005, 06:19 PM -
Metering device?
By Apoc in forum IndustrialReplies: 18Last Post: 20-07-2004, 09:36 AM -
metering device sizing
By dantoubiana in forum Technical SpeculationsReplies: 7Last Post: 21-01-2003, 07:17 PM